DC DC I.C WORKING DATA FOR LCD PANEL REPAIRING
I have prepared a professional technical description for your LCD/LED TV panel repair educational material. It explains the four IC references shown in your diagram and highlights their importance for practical T-CON troubleshooting.
LCD TV T-CON DC-DC IC DATA & PIN CONFIGURATION – TECHNICAL REPAIR GUIDE
Research, Data Collection & Rearrangement By: Imran Ashraf
This technical reference chart is specially prepared for LCD/LED TV panel repair technicians, electronics engineers, and students who want to understand T-CON board power supply circuits, DC-DC converter ICs, pin configurations, and panel voltage generation systems.
The chart contains schematic diagrams, IC pin configurations, and important signal names for four commonly encountered IC references.
1. 6861AAQ – DC-DC Converter IC
This section provides the 6861AAQ IC pin configuration and associated application circuit.
Important circuit labels shown include:
VIN – Input voltage
AVDD / VAVDD – Analog supply
VGH – Gate High voltage
VGL – Gate Low voltage
VGHM – Gate High related supply
OP / OPN – Operational amplifier-related signals
EN – Enable signal
PGND – Power ground
REF – Reference signal
This information can help technicians trace the input supply, output voltage paths, control signals, and associated components.
2. CM501 – DC-DC Converter IC
The CM501 section contains its IC pin arrangement and application circuit.
Important labels include:
VIN – Input supply
AVDD – Analog voltage
VGH – Gate High
VGL – Gate Low
VGHM – Gate High related supply
DRN / DRV – Drive-related signals
SUPN / SUP – Supply-related pins
FBN / VREF – Feedback and reference signals
EN – Enable
OPP / OPN – Operational amplifier-related signals
VCOM – Common voltage
This reference can assist in identifying the different sections of the power supply circuit during T-CON board troubleshooting.
3. RT6929 – Pin Configuration & Application Circuit
The RT6929 section presents the IC pinout and associated circuit connections.
Important signal names visible in the diagram include:
VIN – Input voltage
3.3V – Logic supply
1.8V – Logic supply
VDD18
RESET
EN
FAULT
SCL / SDA – Communication signals
VCOM
AVDD
AGND / PGND
These signals are useful when examining IC control, logic supply, communication, and voltage-generation sections.
4. RT6919C – Pin Configuration Reference
This section provides the RT6919C IC pin arrangement for identifying important panel-related signals.
Important pin names include:
AVIN
PVINB1
SWB1 / SWB2 / SWB3
PGND
OUT3
PG
SCL / SDA
VL
VCOM
VCOMFB
VCOMDAC
VGH
VGL
GMA_N6 to GMA_N4
GMA_P3 to GMA_P1
COMP
SS
RESET
VST
CK1 to CK6
These names help technicians understand the IC's supply, switching, gamma, VCOM, gate-drive and control-related pin groups.
PRACTICAL USE FOR LCD PANEL REPAIR
This reference material can help technicians with:
Identifying DC-DC converter IC pins.
Tracing VIN input supply.
Checking AVDD, VGH and VGL supply sections.
Identifying Enable and control signals.
Understanding feedback and reference pins.
Locating switching and ground connections.
Understanding VCOM and gamma-related connections.
Troubleshooting missing panel voltages.
Studying T-CON power supply circuits.
Improving practical knowledge of LCD panel electronics.
IMPORTANT TECHNICAL NOTE
The diagrams are educational pinout and circuit references. Actual pin functions, operating voltages, enable logic levels, and component connections must be verified against the exact IC datasheet and board circuit. Different revisions and implementations may vary.
EDUCATIONAL PURPOSES ONLY
Prepared and rearranged by IMRAN ASHRAF
LCD/LED TV Panel Repair Specialist | Book & Content Writer | Engineer & Trainer
Practical LCD/LED TV Repair Education & Technical Support.
Suggested title for publishing:
LCD T-CON DC-DC IC Complete Pinout Collection | 6861AAQ, CM501, RT6929 & RT6919C | By Imran Ashraf
https://lcdledtvsoftware.wordpress.com/

No comments:
Post a Comment