imranashraf2016: Do It Your Self PC Oscilloscope

Soundcard Oscilloscopedeutsche Version

Front panel of the soundcard oscilloscope

Author: Christian Zeitnitz
Main features:
The PC based Soundcard Oscilloscope receives its data from the Soundcard with 44.1kHz and 16 Bit resolution. The data source can be selected in the Windows mixer (Microphone, Line-In or Wave). The frequency range depends on the sound card, but 20-20000Hz should be possible with all modern cards. The low frequency end is limited by the AC coupling of the line-in signal. Be aware, that most microphone inputs are only mono.
The oscilloscope contains in addition a signal generator for 2 channels for sine, square, triangular, sawtooth wave forms and different noise spectra in the frequency range from 0 to 20kHz. The signal can be defined by a mathematical formula as well. The signals are available at the speaker output of the sound card. These can be fed back to the oscillocope in order to generate Lissajous figures in the x-y mode.
Download the latest version: scope V1.46
Obtain a commercial license here
Interested in a customized version?

Support the development of this program by obtaining a private donation license

Additional features

Lissajous figure generated and displayed by the soundcard oscilloscopes (x-y mode)

Trigger modes: off, automatic, normal and single shot
Triggerlevel can be set with the mouse
The signals of the two channels can be added, subtracted and multiplied
x-y mode
Frequency analysis (Fourier spectrum)
Waterfall diagram (frequency spectrum as function of time)
Frequency filter: low-, high-, band-pass and band-stop
Cursors to measure amplitude, time and frequency in the main window
Audio Recorder to save data to a wave file
For multi soundcard system, the used card can be selected in the settings tab

The program has been written in LabView (™ by National Instruments). For the actual Sound I/O part the WaveIO package by the same author has been used.

Signal Sources

The signals for the oscilloscope can be internal to the computer (MP3 player, function generator etc.) or from external sources (line-in, microphone). For external sources care has to be taken, not to exceed the voltage range of the inputs. The range is usually only ±0.7V !! If higher voltage need to be analyzed, a voltage divider has to be used. Additional protection diodes are recommended in order to avoid any damage to the sound card and to the computer.

Requirements

This program will run on Windows 2000/XP/Vista/7/8 (32bit and 64bit) computers with a sound card. It will not install on older versions of Windows. The speed requirements are not very hard. A 1GHz machine is suffient. On slower CPUs the load on the system might lead to reduced responsiveness of the system.

Terms of usage and licenses

This Software and all previous versions are NO Freeware!

The use of the software and of the documentation is granted free of charge for private and non-commercial use in educational institutions
Any commercial application requires a corresponding license (see below)
Distribution and sale of the program is prohibited. Contact the author in order to obtain a resale license.

If you like to support the further development of this program please obtain a private license by following this link
Commercial usage: In order to obtain a commercial license follow this link
All right reserved.

The signal generator is utilizing.

Downloads

Instructions: The program comes as a self-extracting archive and will start the installation automatically. After the installation start the scope from the entry in the program menu. Enjoy !
Version 1.46

Changes
- Improved mouse control of the amplitude measurement: after the acquisition is stopped (Run/Stop) a right click into the scope window starts the measurements. A left click positions the cursor on the time axis. The left and right cursor keys allow a fine adjustment of the cursor
- Mouse control of measurement in the frequency window: left click positions the cursor on the frequency axis. Fine adjustment with the left and right cursor keys
- Expert mode allows to modify the sampling rate within the program and direct access to the configuration file
- Solved CPU load problem for long time window
- Memory problem solved
- One more crash problem solved when running under Windows 2k/XP behoben
Version 1.46 of the program (all languages): scope_146
Only the englisch manual für Version 1.46
License
- All licenses obtained for previous scope versions are valid for this version as well
- Private license to support the further development of the program
- Commercial license for the usage in companies and non-public educational institutions

+Older versions

Final Remarks

The program requires a correctly installed and configured soundcard on your Windows computer. In case of problems consult the manual and the frequently asked question.
If you still have a software related problem send mail to C.Zeitnitz

LCD LED Tv Panel Bypassing Methods eBooks.

Learn how to repair Panel failures,T-con problem in LCD LED TVs with comprehensive guide line with Schematics and Pictures of Problems, This eBook (PDF) or (Doc)format was written for Advanced Level of Technician of LCD LED and Plasma TV repair and includes many Bypass method. If you want to become expert in this filed of LCD LED TV repair than this is a good eBook for you. Maybe you have a broken LCD TV sitting at home or your workshop and you want to repair it quickly. No Problem who you are or what your reason is for wanting to repair LCD or LED TVs you have come to the right place.Once you have complete your purchase you will be sent a link to download a copy immediately.
Volume 1 ,
Volume 2 ,
Inverter Bypass eBook,
SMD Data Guide eBook.

E-mail me after you deposit 55 USD with Paypal System.

At lcdledebooks@gmail.com

LCD LED Panel Méthodes Contournement eBooks .

LCD LED Panel Méthodes Contournement eBooks .
Apprendre à réparer les défaillances du panneau , problème T - con dans TVs LCD LED avec la ligne guide complet avec schémas et photos de problèmes , Cet eBook ( PDF ) ou ( Doc ) format a été écrit pour avancée de niveau technicien de LED LCD et Plasma TV réparation et comprend de nombreuses méthodes de contournement . Si vous voulez devenir expert dans ce dépôt de réparation de TV LCD LED que cela est un bon eBook pour vous. Peut-être que vous avez un téléviseur LCD cassé assis à la maison ou dans votre atelier et vous voulez réparer rapidement. Pas de problème qui vous êtes ou ce que votre raison est de vouloir réparer les téléviseurs LCD ou LED vous avez frappé à la bonne place.Once vous avez compléter votre achat, vous recevrez un lien pour télécharger une copie immédiatement.

LCD/LED पैनल रिपेयर करने केलिए विवरण हमको ब्लॉग में, सर्विस मैन्युअल में, इंटरनेट पे मिलते हे ,लेकिन हमको सभी जगहों पर पहुँच नहीं सकते, हमें एक साथ सभी विवरण मिलता तो बहुत अच्छा होगा, ebooks of Lcd Led Tv Bypassing Methods में पैनल का बहुत सारा विवरण दिया हुआ हे,मेरे को यकीन हे ये हमारे दैनिक जीवन में मदद करेंगे , ये बुक आपको ऑनलाइन पे भी खरीद सकते हो, इसकेलिए आप ये वेबसाइट पे जाने का हे

www.electronics-tricks.blogspot.com

പാനൽ നന്നാക്കുവാൻ സഹായിക്കുന്ന ഒരുപാട് കാര്യങ്ങൾ ഇന്റെർനെറ്റിലും ,ബ്ലോഗുകളിലും ,സർവീസ് മാനുവലുകളിലും ഉണ്ടെങ്കിലും നമുക്ക് എല്ലാ സ്ഥലത്തും എത്തിപെടാൻ ബുദ്ധിമുട്ടാണ് ,അങ്ങനെയുള്ളപ്പോൾ നമുക്ക് ആവശ്യമുള്ള പാനൽ സന്ബന്ധമായ ഒരുപാട് കാര്യങ്ങൾ കോർത്തിണക്കി കൊണ്ടുള്ള ഒരു പുസ്തകമാണ് ebooks of Lcd Led Tv Bypassing Methods

ഇതിന്റെ ഉള്ളടക്കം നിങ്ങള്ക്ക് ഉപയോഗത്തിൽ വരുമെന്നതിന് സംശയം ഒന്നും തന്നെ വേണ്ട.ഈ ബുക്ക്‌ വാങ്ങുന്നതിന് വേണ്ടി ഓണ്‍ലൈൻ വഴി പണം അടക്കാം, അതിനു വേണ്ടി പേജ് സന്ദർശിക്കുക

lcdledebooks@gmail.com

boeke .

Leer hoe om afbreekpunte paneel op te los , probleem T con in die LCD LED TV's met 'n omvattende gids ooreenstemming met planne en foto's van die probleme , het hierdie e-boek ( PDF ) of formaat ( die dokument ) , die gevorderde vlak van die tegnikus van die LCD & LED geskryf hervorming van die plasma-TV en sluit baie van die manier omseil .

Please Contact Us at Our Facebook Page and email us at lcdledebooks@gmail.com

+923139292880

https://www.facebook.com/lcdtelevision